Over the past couple of months I’ve been working on a lot on tooling against barrel files. A barrel file is essentially just a big index.js file that re-exports everything else from the package. Which means that if you import only one thing from that barrel file, you end up loading everything in its module graph. This has lots of downsides, from slowing down runtime performance to slowing down bundler performance. You can find a good introduction on the topic here or a deep dive of the effects of barrel files on a popular real world library here.
In this post, I’ll give some practical advice for library authors on how to deal with barrel files in your packages.
Use automated tooling
First of all, automated tooling can help a lot here. For example, if you want to check if your project has been setup in a barrel-file-free way, you can use barrel-begone:
barrel-begone will analyze your packages entrypoints, and analyze your code and warn for various different things:
The total amount of modules loaded by importing the entrypoint
Whether a file is a barrel or not
Whether export * is used, which leads to poor or no treeshaking
Whether import * is used, which leads to poor or no treeshaking
Whether an entrypoint leads to a barrel file somewhere down in your module graph
Lint against barrel files
Additionally, you can use linters against barrel files, like for example eslint-plugin-barrel-files if you’re using ESLint. If you’re using tools like Oxlint or Biome, these rules are already built-in. This eslint plugin warns you against authoring barrel files, but also warns against importing from other barrel files, and helps you avoid using barrel files all around.
Avoid authoring barrel files
For example, if you author the following file, the eslint plugin will give a warning:
// It will also provide additional warnings, for example again using namespace re-exports:
export * from ‘./foo.js‘; // Error: Avoid namespace re-exports
export { foo, bar, baz } from ‘./bar.js‘;
export * from ‘./baz.js‘; // Error: Avoid namespace re-exports
Avoid importing from barrel files
It will also warn you if you, as a library author, are importing something from a barrel file. For example, maybe your library makes use of an external library:
This will give the following warning:
If you run into this, you can instead try to find a more specific entrypoint to import thing from. If the project has a package exports map, you can consult that to see if there’s a more specific import for the thing you’re trying to import. Here’s an example:
“name”: “external-dep-thats-a-barrel-file”,
“exports”: {
“.”: “./barrel-file.js”, // 🚨
“./thing.js”: “./lib/thing.js” // ✅
}
}
In this case, we can optimize our module graph size by a lot by just importing form “external-dep-thats-a-barrel-file/thing.js” instead!
If a project does not have a package exports map, that essentially means anything is fair game, and you can try to find the more specific import on the filesystem instead.
Don’t expose a barrel file as the entrypoint of your package
Avoid exposing a barrel file as the entrypoint of your package. Imagine we have a project with some utilities, called “my-utils-lib”. You might have authored an index.js file that looks like this:
export { debounce, throttle } from ‘./timing.js‘;
export * from ‘./analytics.js‘;
Now if I, as a consumer of your package, only import:
I’m still importing everything from the index.js file, and everything that comes with it down the line; maybe analytics.js makes use of a hefty analytics library that itself imports a bunch of modules. And all I wanted to do was use a debounce! Very wasteful.
On treeshaking
“But Pascal, wont everything else just get treeshaken by my bundler??”
First of all, you’ve incorrectly assumed that everybody uses a bundler for every step of their development or testing workflow. It could also be the case that your consumer if using your library from a CDN, where treeshaking doesn’t apply. Additionally, some patterns treeshake poorly, or may not get treeshaken as you might expect them too; because of sideeffects. There may be things in your code that are seen as sideeffectul by bundlers, which will cause things to not get treeshaken. Like for example, did you know that:
Is seen as sideeffectful and might mess with your treeshaking?
Create granular entrypoints for your library
Instead, provide granular entrypoints for your library, with a sensible grouping of functionality. Given our “my-utils-lib” library:
export { debounce, throttle } from ‘./timing.js‘;
export * from ‘./analytics.js‘;
We can see that there are separate kinds of functionality exposed: some math-related helpers, some timing-related helpers, and analytics. In this case, we might create the following entrypoints:
my-utils-lib/math.js
my-utils-lib/timing.js
my-utils-lib/analytics.js
Now, I, as a consumer of “my-utils-lib”, will have to update my import from:
to:
Small effort, fully automatable via codemods, and big improvement all around!
How do I add granular entrypoints?
If you’re using package exports for your project, and your main entrypoint is a barrel file, it probably looks something like this:
“name”: “my-utils-lib”,
“exports”: {
“.”: “./index.js” // 🚨
}
}
Instead, create entrypoints that look like:
“name”: “my-utils-lib”,
“exports”: {
“./math.js”: “./lib/math.js”, // ✅
“./timing.js”: “./lib/timing.js”, // ✅
“./analytics.js”: “./lib/analytics.js” // ✅
}
}
Alternative: Subpath exports
Alternatively, you can add subpath exports for your package, something like:
“name”: “my-utils-lib”,
“exports”: {
“./lib/*”: “./lib/*”
}
}
This will make anything under ./lib/* importable for consumers of your package.
A real-life example
Lets again take a look at the msw library as a case study. msw exposes a barrel file as the main entrypoint, and it looks something like this:
Note: I’ve omitted the type exports for brevity
/* Request handlers */
export { RequestHandler } from ‘./handlers/RequestHandler‘
export { http } from ‘./http‘
export { HttpHandler, HttpMethods } from ‘./handlers/HttpHandler‘
export { graphql } from ‘./graphql‘
export { GraphQLHandler } from ‘./handlers/GraphQLHandler‘
/* Utils */
export { matchRequestUrl } from ‘./utils/matching/matchRequestUrl‘
export * from ‘./utils/handleRequest‘
export { getResponse } from ‘./getResponse‘
export { cleanUrl } from ‘./utils/url/cleanUrl‘
export * from ‘./HttpResponse‘
export * from ‘./delay‘
export { bypass } from ‘./bypass‘
export { passthrough } from ‘./passthrough‘
If I’m a consumer of msw, I might use msw to mock api calls with the http function, or graphql function, or both. Let’s imagine my project doesn’t use GraphQL, so I’m only using the http function:
Just importing this http function, will import the entire barrel file, including all of the graphql project as well, which adds a hefty 123 modules to our module graph!
Note: msw has since my last blogpost on the case study also added granular entrypoints for msw/core/http and msw/core/graphql, but they still expose a barrel file as main entrypoint, which most of its users actually use.
Instead of shipping this barrel file, we could group certain kinds of functionalities, like for example:
http.js:
graphql.js:
builtins.js:
utils.js:
That leaves us with a ratatouille of the following exports, that frankly I’m not sure what to name, so I’ll just name those todo.js for now (I also think these are actually just types, but they weren’t imported via a type import):
Our package exports could look something like:
“name”: “msw”,
“exports”: {
“./http.js”: “./http.js”,
“./graphql.js”: “./graphql.js”,
“./builtins.js”: “./builtins.js”,
“./utils.js”: “./utils.js”,
“./TODO.js”: “./TODO.js”
}
}
Now, I, as a consumer of MSW, only have to update my import from:
to:
Very small change, and fully automatable via codemods, but results in a big improvement all around, and no longer imports all of the graphql parser when I’m not even using graphql in my project!
Now, ofcourse it could be that users are not only importing the http function, but also other things from ‘msw’. In this case the user may have to add an additional import or two, but that seems hardly a problem. Additionally, the evidence seems to suggest that most people will mainly be importing http or graphql anyway.
Conclusion
Hopefully this blogpost provides some helpful examples and guidelines for avoiding barrel files in your project. Here’s a list of some helpful links for you to explore to learn more:
barrel-begone
eslint-plugin-barrel-files
oxlint no-barrel-file
biome noBarrelFile
Barrel files a case study
Speeding up the JavaScript ecosystem – The barrel file debacle
