I like a lot non-x86 architectures, I still enjoy writing software for PowerPC even nowadays and I’m looking forward to see how SVE will be once there is hardware in the right price range.
Today it is the turn of RISC-V since there is eventually a, hopefully, nice board sporting a cpu with the RISC-V Vector Extension 1.0 that is now part of the RISC-V.
Where to start
The official documentation is available here.
The board comes with an empty eMMC, so either you start with a SD, or you need to upload a valid image using dfu.
Sadly the usb-c does not multiplex also the serial, so you’ll need to connect the usual 3 pins with a 3.3V usbserial.
ERROR: sd f! l:76
bm:0
ERROR: emmc: invalid bootinfo magic code:0x0
ERROR: invalid bootinfo image.
ERROR: entering download mode.
ROM: usb download handler
usb2d_initialize : enter
Force usb FS mode!
Controller Run
usb rst int
SETUP: 0x0 0x5 0x1
SETUP: 0x80 0x6 0x100
SETUP: 0x80 0x6 0x100
SETUP: 0x80 0x6 0x302
SETUP: 0x80 0x6 0x302
SETUP: 0x80 0x6 0x301
SETUP: 0x80 0x6 0x301
SETUP: 0x80 0x6 0x30a
SETUP: 0x80 0x6 0x30a
SETUP: 0x80 0x6 0x200
SETUP: 0x80 0x6 0x200
SETUP: 0x80 0x6 0x300
Their images are Debian derivatives, I prefer Gentoo and since we have stage3 for rv64_lp64d-openrc, I guess I can give it a try.
Vendor-sources for kernel and bootloaders are available and I can piggy back over that image if I stumble over opensbi or u-boot or I run out of time sorting out the patches for linux-6.1.15
Prerequisites
wezterm or screen to see what’s going on
u-boot-tools are needed since the kernel image will would come in a FIT image.
The armbian tree or any of the pre-made builds provided.
A recent stage3
Lazy Setup
The base images share this layout:
1 256 767 256.0 KiB 8300 fsbl
2 768 895 64.0 KiB 8300 env
3 2048 4095 1024.0 KiB 8300 opensbi
4 4096 8191 2.0 MiB 8300 uboot
5 8192 532479 256.0 MiB 8300 bootfs
6 532480 <> <> GiB 8300 rootfs
With the rootfs taking the space it needs.
The easiest way is to copy the first 5 partitions to the eMMC
And then recreate the rootfs partition.
[!note] the initramfs does not support btrfs, nor the u-boot configuration. Until kernel and initramfs are replaced it is safer to stick to ext4 (I made this mistake).
Then the usual manual unpack of a stage3 and chroot described in Gentoo Handbook works.
Pitfalls known so far
Make sure to enable the serial ports in /etc/inittab
s1:12345:respawn:/sbin/agetty -L 115200 ttyS1 vt100
The default u-boot command script is incomplete, if you want to use the nvme, you have to enter the u-boot console (press s)
=> run nor_boot
Coming next
I hadn’t tried yet to:
update u-boot and change a bit its configuration
build a new kernel
put everything together to have btrfs on nvme
